OUGD504 - Design for Print - Mock Up #2

Created a mock up using black binding tape and stitch so that I could make a firm decision on the page size in comparison to the cover.

In order to conserve binding tape, I cut it down to 4cm, leaving 1cm to accommodate the bind. However, over time the edges of the tape began to un-peal because the fold is so close to the tape. Therefor I will use 5mm tape for my final publication.

Binding

Estimated the amount of pages so that I could tailor the spine to accommodate all the stock and get an accurate mockup so that the final production is well considered. As I am using black binding tape to join the covers together I researched into different types of thread to contrast with the matt black tape. Visiting Fred Aldous offered me an array of colours and style.

The red, blue and navy twist are colours taken from Bristol's crest, exposing a hint of colour and adding to the bespoke aesthetics and a hint charm to the minimal, grey cover.

The thread that I have identified is very thick which means that I will have to use a thick needle to stitch the publication together. This was problematic as I struggled to pull the needle and thread through the small binding holes. To overcome this, I used a pair of pliers to grip the needle and pull it through. Although this is an unconventional method, it was appropriate for a mock up.

Annotated the pages so that I could visualise the pagination:

Took influence from my research into Printed Pages and introduced a small pamphlet in the centre of the publication:

The change in scale puts the audience into a new context where I can potentially add some expressive and engaging compositions based on my early concepts. To take the audience out of context, I aim to use a coloured stock across the double page spread.

Visible stitch is appropriate for the bespoke feel that I aim my publication to have and also reflects Bristol's 'rough and ready' approach.

As I was asking for feedback, it became apparent that the narrow A4 pages may bend the cover because the stock finishes an inch away from the cover, therefore I aim to increase the page width.

I noticed that the thick thread and needle can chew up the thin stock - This is something I will consider when choosing my stock as I want the publication to have a quality and professional finish.